06
Wipe the motor unit with a damp cloth and dry thoroughly.
Remove the stubborn spots by rubbing with non-abrasive
cleaner. If liquids spill into the motor unit; first unplug the
unit, then wipe with a damp cloth and dry thoroughly.
Warning: Blending maximum level load or hard fruits and
vegetables must be sure that the speed selector is setting
at highest speed (speed 5). If the speed is used too low, the
motor will be damaged due to insufficient torque. When
the motor speed is found to be too slow, you must immedi-
ately use a higher speed setting to blend or turn the speed
selector to “0” to stop blending!
CAUTION:
Do not immerse the motor unit in liquid to prevent the
risk of electric shock.
Do not use rough scouring pads or cleansers on parts or
finish.
Rinse the measure cup, lid, seal ring 1, jar, seal ring 2 and
blade assembly by hands or in a dishwasher and then dry.
They are dishwasher safe components, but the tempera-
ture setting shall not exceed 70
℃
.
Brush the blade clean using warm soapy water, then rinse
thoroughly under the tap. Don’t touch the sharp blades,
handle carefully. Don’t immerse the blade assembly in
water. Leave to dry upside down away from children.
FIG.8
motor unit, To detach the blade assembly by turning it
clockwise from the jar base bottom , and remove the blade
assembly (see fig.8). In addition, detach the jar cover seal
ring 1 from the jar cover.
