Invert the jar onto a level surface, holding the jar handle,
put the blade assembly onto the jar base bottom and
secure the blade assembly by turning it anti-clockwise until
tight.
（
See Fig.3
）
Reposition the jar assembly with its opening upwards.
Wrap the seal ring 1 around the lid bottom and put the lid
onto the jar assembly. Place the measure cup exactly into
the lid by fitting the small projection on the both sides of
the cup into the slots of the lid and turning the cup
clockwise until tight.
（
See Fig.4
）
Finally, place the assembled jar onto the motor unit by
aligning the strip on the assembled jar bottom. (See Fig.5
）
CAUTION: Jar and jar base is now secure. Do not try to
twist the jar and jar base onto motor unit .
HOW TO USE
Peeled or cored the fruit or vegetables and then cut it into small
dices.
Place the food to be blended into the jar
（
See Fig.6
）
. Usually,
certain amount of purified water has to be added to facilitate
the smooth running of appliance. The proportion of the food
and water is 2:3. The amount of mixture should not exceed the
max level as indicated on the jar.
04
FIG.3
FIG.5
FIG.4
RECIPE
FOOD TYPE
SPEC
WEIGHT
SPEED
Carrot (apple,
pear etc.
)
Cut into 15mm*15mm*15mm
Carrot: 600g
Water: 900g
High speed
Carrot (apple,
pear etc.
)
Cut into 6mm*6mm*6mm
Carrot: 50g
Water: 150g
Low speed
Note: never use boiling liquids or run the appliance empty.
Put the lid on the jar. Be sure the measuring cup is in place.
Plug the power cord into a standard wall outlet.
Turn the speed knob to the appropriate speed setting for your
task(Please stir food at the highest speed,but not at low speed).
For quick or delicate blending tasks, turn the speed knob to P
position and hold for a few seconds and then release, the knob
will reset to O position automatically. Operate several times
until the consistence you want is obtained.
