32
KD2 Pro Operator’s Manual
4. The KD2 Pro Utility
be permanently deleted from the KD2 Pro, and cannot
be recovered!
To erase the data, do the following:
1. Make sure that the RS-232 cable is connected to the KD2
Pro, and to a COM port on your computer.
2. Choose the appropriate COM port from the “Use com-
puter communications port” control on the main screen
3. Click “Erase,” in the lower left-hand corner, or select
“Erase Data...” from the File Menu.
If you encounter an error message after clicking this
button, please refer to the Troubleshooting section
for instructions.
4. A progress bar shows the status of the erase process.
Setting the Date and Time
You can set the KD2 Pro’s date and time by selecting “Set
KD2 Pro Date/Time...” from the Actions Menu. This will
automatically sync the KD2 Pro’s date and time to your com-
puter’s time.
Setting the Auto Mode
The Auto mode of the KD2 Pro allows you to perform auto-
mated, unattended measurements at specified time intervals.
The KD2 Pro has pre-set measurement intervals to select for
this mode, but you can better customize how the KD2 Pro
operates in Auto mode using the KD2 Pro Utility software.
For example, you can select specific measurement intervals,
