5TE Operator’s Manual
8. Troubleshooting&Sensor Care
26
Cleaning Method
1. Wash the screws thoroughly with a drop of Dawn or other
grease cutting dish soap and warm water. Be sure that the
soap doesn’t contain skin conditioners or moisturizers.
2. Rinse the probe and screws thoroughly with tap water to
remove all remnants of soap.
3. Dry the screws with a clean paper towel. Use a scrubbing
motion to dry the screws to be sure any particles have
been detached. Be sure that the paper towel does not have
any skin conditioners or moisturizers in it, as this will
undo all of the cleaning that you have just accomplished.
Be sure not to touch the screws with an un-gloved hand or to
contact them with any source of oil or other non-conducting
residue.
