Getting Started
1–2 Installation and Setup Guide
Pre-Startup Checklist
Before you start your system, perform the following checks:
•
Review the information supplied with your system, including user documentation.
•
Select a well-ventilated site for your system near a grounded power outlet and away
from sources of excessive heat. The site also should be isolated from electric noise
(for example, spikes, sags, and surges) produced by devices such as air conditioners,
large fans, radios, and televisions.
•
Save all shipping containers and packing material for repackaging or moving the
system later.
NOTE: Do not install optional hardware or application software until you have started
your system and verified that the base system is working correctly.
WARNING: When unpacking and moving system components, be aware that
some components (such as the monitor) may be too heavy for you to lift alone safely.
If you are doubtful about whether you can lift these items alone, please get assistance.
Creating a Comfortable Work Environment
If you exercise poor posture while you work or if your equipment
is poorly set up, certain recent scientific articles suggest that
personal injury may result. Other articles suggest that there is no
cause and effect. Because the safety of our users is a great
concern to Digital Equipment Corporation, we strongly urge that
you read and follow the precautions outlined in the figure and
Table 1-1. In addition, be sure to adjust your work space so that
you are comfortable, and change your position frequently.
