4
3. INSTALLATION:
3.1 GENERAL:
On initial installation and
before each use, remove all loose parts from
the filter, wash the filter pan and all
accessories in hot, soapy water and dry
thoroughly.
3.2
ASSEMBLYING THE FILTER:
The Super Cascade Filter is available in two
configurations. The configurations differ in
the filtering medium used. The first
configuration uses filter paper and a hold-
down ring to secure that paper. The second
configuration, found on certain 2424SCFs
only, uses a Magnum Filter Leaf Kit instead
of filter paper as a filtering medium.
Filter Paper Configuration:
a. Figure 3-1 shows the proper assembly of
these parts:
1.
Filter Pan Cover
2.
Crumb Catcher Screen
3.
Filter Paper (2 sheets)
4.
Hold-Down Ring
5.
Protective Screen/Support Grid
6.
Filter Pan Assembly
b.
First place the support grid in the bottom
of filter pan.
c.
Put two filter paper sheets on top of the
support grid. Be sure the paper covers the
whole filter pan bottom.
d.
Position the hold-down ring on top of the
filter papers and latch the hold-down ring
and filter papers securely against the filter
pan bottom. When positioning the hold-
down ring, do it evenly around the filter
pan and papers to create a good seal
around the support grid which prevents
any air from getting into the system.
e.
Sprinkle 16 ounces of filter powder on the
top filter sheet. Ensure that the powder
covers the filter paper evenly.
f.
Place the crumb catcher screen in the
filter pan. Allow the crumb catcher to
rest on the top edges of the hold-down
ring.
1
2
3
6
5
4
Figure 3-1
WARNING!
DO NOT RUN WATER THROUGH
THE FILTERING SYSTEM. THE
FILTER PUMP IS NOT DESIGNED TO
HANDLE WATER. THIS WILL VOID
THE WARRANTY FOR THAT
SYSTEM, DAMAGE THE PUMP AND
CAUSE ACCIDENTS IF WATER
MIXES WITH HOT OIL.
