HUMMER H1: STEP BY STEP
™
187
17
17
21
21
23
23
20
20
19
19
24
24
18
18
22
22
Turn the servo savers until
they line up directly with
the circled holes on the
front upper plate.
Position the front torque
rod beneath the center of
the front upper plate, as
shown by the arrow.
Repeat Steps 18 and 19
for the left servo saver
and the second 4 × 10mm
binding-head screw.
Tighten the screw,
but not entirely at this
stage, as the lower part
of the steering post is
not fixed yet.
Tighten the screw securely
with a screwdriver.
Set a 3 × 10mm binding-
head screw into the hole,
as shown.
Place the first 4 × 10mm
binding-head screw into
the right hole in the front
upper plate and through
to the hole in the right
servo saver.
Fit the front torque
rod to the upper plate,
so that the contours
of each are flush with
one another.
