Repeat Steps 2 to 4 to fit the screw
hole cover to the hole behind the front
right indicator.
Push the footrest fully into the rubber.
Take the pillion footrest and the pillion
footrest rubber, and line up the flat side
of the thin end of the footrest with the
flat side of the hole in the rubber.
Push the end of the footrest between the sides of the
bracket, aligning the holes of both parts.
Insert the pillion footrest pivot into the hole in the
bracket, and push it through as far as you can.
Use pliers wrapped in masking tape to squeeze the
pivot all the way through the footrest and bracket.
Line up the exposed end of the pillion
footrest with the open side of the pillion
footrest bracket, as shown.
5
6
7
8
9
10
11
365
Honda CB750 FOUR:
Assembly Guide
Summary of Contents for MODEL SPACE Honda CB750 FOUR
Page 1: ...353 BUILDYOUR OWN Pack 23 TM ...
Page 20: ...20 Honda CB750 FOUR TM ...