9
TEO 700
Sectional door electromechanical operator
Operating instructions and warnings
Index
1
Warnings Summary
9
7
Start-up
14
2
Product Description
10
7.1
Installation Test
14
3
Technical data
10
7.2
Unlocking and manual operation
14
4
Installation and Assembly
10
8
Maintenance
14
5
Electrical Connections
11
9
Product Disposal
15
6
Programming
12
Product Conformity
DEA
System guarantees the conformity of the product to European Directives 2006/42/CE regarding “machinery safety”, 2014/30/
EU “electromagnetic compatibility” and 2014/35/EU “low voltage electrical equipment”. See
Declaration of Incorporation.
1 WARNINGS SUMMARY
Read these warnings carefully; failure to respect the following warnings may cause risk situations.
WARNING
Using this product under unusual conditions not foreseen by the manufacturer can create situations of danger, and for this
reason all the conditions prescribed in these instructions must be respected.
WARNING
DEA
System reminds all users that the selection, positioning and installation of all materials and devices which make up
the complete automation system, must comply with the European Directives 2006/42/CE (Machinery Directive), 2014/30/EU (electro
-
magnetic compatibility), 2014/35/EU (low voltage electrical equipment). In order to ensure a suitable level of safety, besides complying
with local regulations, it is advisable to comply also with the above mentioned Directives in all extra European countries.
WARNING
Under no circumstances must the product be used in explosive atmospheres or surroundings that may prove corrosive and
damage parts of the product.
WARNING
To ensure an appropriate level of electrical safety always keep the 230V power supply cables apart (minimum 4mm in
the open or 1 mm through insulation) from low voltage cables (motors power supply, controls, electric locks, aerial and auxiliary circuits
power supply), and fasten the latter with appropriate clamps near the terminal boards
.
WARNING
All installation, maintenance, cleaning or repair operations on any part of the system must be performed exclusively by
qualified personnel with the power supply disconnected working in strict compliance with the electrical standards and regulations in
force in the nation of installation.
WARNING
Using spare parts not indicated by
DEA
System and/or incorrect re-assembly can create risk to people, animals and
property and also damage the product. For this reason, always use only the parts indicated by
DEA
System and scrupulously follow all
assembly instructions.
WARNING
Incorrect assessment of the impact forces can cause serious damage to people, animals or things.
DEA
System reminds
the installer must verify that the impact forces, measured as indicated by the standard EN 12445, are actually below the limits set by
the standard EN12453.
WARNING
Any external security devices used for compliance with the limits of impact forces must be conform to standard EN12978
.
WARNING
In compliance with EU Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), this electrical prod
-
uct should not be treated as municipal mixed waste. Please dispose of the product and bring it to the collection for an appropriate
local municipal recycling.
