25
De Gier B.V., Westlandseweg 9, 2291 PG WATERINGEN, THE NETHERLANDS,
+31 174 292089, [email protected], www.degierdrivesystems.com
Versie 1 – 07/01/2021
3.5.4 Set I-DE current output start position (Main menu 4)
It is possible to configure the position at which the I-DE starts to output a current. Users can choose from 2 options:
option 1: the start position at 0 mA or 4 mA
option 2: the start position at 20 mA
To do this, follow the steps below.
NOTE: The step-by-step plan below assumes that the I-DE is currently in «main menu 1» (see Figure 7).
If the I-DE is in «Normal operation» or «Error mode», «Main menu 1» can be accessed by pushing and holding the but-
ton for two seconds.
3 Operation