D E T A I L E D A R C H I T E C T U R E
Data Device Corporation
SB-3624XIX-3L0 Manual
www.ddc-web.com
Rev D -10/15
41
Figure 33. Select Card Screen
2. Select a card from the drop down list, then click
Select
.
Note: Selecting Demo Mode will open up a demo application screen where input
information can be simulated, even if a card is not installed.
3. When the GUI application is initiated a 45-degree angle is simulated into
each channel. If the digital output is correct the Self-Test results will
indicate passed as shown below. If a channel is not functioning the Self-
Test will return a failed indication.
Note: If a channel fails Self-Test, the user can still use the Graphical Interface, but
the failed channel will not be accessible.
Figure 34. Self-Test Results
4. To set the oscillator amplitude and frequency click
Set Options,
this will
open the menu shown below. From this menu the display information
can be configured to correspond to the hardware configuration. The
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
