DCS RF48SS, Service Manual, Page: 51 / 74

52
Make sure to turn it off before disassembly. Risk of electric shock.
PART NAME DESCRIPTION FIGURE
PCB-BOX :
CONDE NSER
①
Disassemble circled 2
screws.
②
Pull out Condenser from
PCB-BOX.
※
Be careful do not
change the terminals
during assembly.
3-WAY VALVE
①
Disassemble the Cover
Grill, disassemble the 3
welded sections.
②
Disassemble 3-way
Valve then disassemble
2 screws and pull out
Housing.
※
Be careful do not change
the pipe during assembly
(red one is for Freezer)
Wrong connection of
pipes alter the gas flow
and cause performance
issues.
CONDE NSER
FAN MOTOR
①
Pull out Fan Ass’y refer
to figure disassemble
circled 2 screws.
②
First disassemble the
locking spring of Fan,
second disassemble 2
screws for mounting
Motor Cover, third
disassemble the wire
Housing and then pull
out the Motor by rotating
it.
POWER
SWITCH
①
Disassemble (circle)2
screws mounting bracket
and Housing connected
to PCB-BOX then pull
out Power switch from
the bracket.
INSULA TION
COVER OF
CONNE CTING
PIPE
①
Disassemble 5 screws
located at the back of
Power switch.
②
The pipes are covered
with insulation tubeing
left is for Freezer, right
is for Fridge.
DOOR
SWITCH
①
After disassembling Cover
Grill, disassemble the
housing of switch like in the
Figure.
②
Disassemble the switch by a
pulling down with squeezing
the lock hooks.
1
2
1
2
1
2 2
1
1
2 2
1 2
BRANDSOURCE-SM(EN) 2007.1.23 10:32 AM 페이지52