DCS RF48SS, Service Manual, Page: 32 / 74

33
No
R-FAN HIGH
R-FAN LOW
R-Defrost Heater
START MODE
Condition under Overload
Condition under Low Temperature
Exhibition Mode
Damper
R-Valve Open
COMP
F-FAN HIGH
F-FAN LOW
F-Defrost Heater
C-FAN HIGH
C-FAN LOW
Dispenser Heater
F-Valve Open
Dispenser Heater
The relevant segment LED comes on when the R- FAN HIGH operates.
The relevant segment LED comes on when the R- FAN LOW operates.
The relevant segment LED comes on when the R- Defrost Heater operates.
The relevant segment LED comes on when the refrigerator is provided with initial power.
The relevant segment LED comes on when the peripheral temperature is over 95
℉
.
The relevant segment LED comes on when the peripheral temperature is over 63 ℉ .
The relevant LED comes on in the Exhibition Mode.
During Damper Open LED segment ON
During R-Valve Open LED segment ON
The relevant segment LED comes on when the COMP operates.
The relevant segment LED comes on when the F- FAN HIGH operates.
The relevant segment LED comes on when the F- FAN LOW operates.
The relevant segment LED comes on when the F-Defrost Heater operates.
The relevant segment LED comes on when the C-FAN HIGH operates.
The relevant segment LED comes on when the C-FAN LOW operates.
The relevant segment LED comes on when the Dispenser Heater operates.
During F-Valve Open LED segment ON
When the peripheral temperature is 64
℉
~ 93
℉
, both "E,F"LED in
the last digit in R-Room is off.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Items DISPLAY LED T r o u b l e s h o o t i n g
Details of Load Status Light Display by Position
FRIDGE SEGMENT
FRIDGE SEGMENT
FRIDGE SEGMENT
FRIDGE SEGMENT
FRIDGE SEGMENT
FRIDGE SEGMENT
FRIDGE SEGMENT
FRIDGE SEGMENT
FRIDGE SEGMENT
FRIDGE SEGMENT
FREEZER SEGMENT
FREEZER SEGMENT
FREEZER SEGMENT
FREEZER SEGMENT
FREEZER SEGMENT
FREEZER SEGMENT
FREEZER SEGMENT
FREEZER SEGMENT
BRANDSOURCE-SM(EN) 2007.1.23 10:31 AM 페이지33