SAMPLE CONFIGURATIONS
CLOSE
LOOP
MEGA-ARM
MEGA-ARM
CARD READER
TELE-ENTRY
RADIO CONTROL
CLOSE
LOOP
MEGA-ARM CARD READER
TELE-ENTRY
DUAL DIRECTION AS ENTRY OR FREE EXIT:
ENTRY WITH ACCESS CONTROL DEVICE:
FREE EXIT ON VEHICLE APPROACH:
RADIO CONTROL
GATE WILL OPEN WHEN SENSED BY
EXIT LOOP AND THEN CLOSE ONCE
VEHICLE PULLS UP TO THE EXIT LOOP
AND THEN BACKS AWAY IT WILL CLOSE.
THE CLOSE LOOP IS CLEARED. IF THE
GATE WILL OPEN WHEN ACTIVATED BY AN
ACCESS CONTOL DEVICE. WHEN VEHICLE
PASSES AND CLEARS CLOSE LOOP, GATE
WILL CLOSE.
NOTE: IF A SECOND VEHICLE TAIL-GATES
AND IS SENSED AT THE CLOSE LOOP, GATE
WILL STOP ITS CLOSING MOTION UNTIL
LOOP IS CLEARED AGAIN.
DUAL DIRECTION IS A COMBONATION OF
BOTH OF THE ABOVE CONFIGURATIONS
TO PROVIDE THE ABILITY FOR TRAFFIC
TO ENTER OR EXIT IN THE SAME LANE.
TERMINAL # 7 IS BACKAWAY (FREE EXIT).
TERMINAL # 6 IS CLOSE INPUT.
TERMINAL # 6 IS CLOSE INPUT.
TERMINAL # 1,2,3 ARE OPEN INPUTS.
BACK AWAY
LOOP
(FREE EXIT)
BACK AWAY
LOOP
(FREE EXIT)
CLOSE
LOOP
(SPACE BETWEEN LOOPS WILL BE 4' TO 10')
(SPACE BETWEEN LOOPS WILL BE 4' TO 10')
RECOMMENDATION 1:
If vehicle detectors are used to open or close the gate, use of the presence contacts are
recommended. Using the pulse contacts will
REDUCE
the gates safe operation.
RECOMMENDATION 2:
If closing timer is to be used, use
ONLY
on a dedicated free exit.
RECOMMENDATION 3:
Close loop must be centered under gate arm.
PAGE 8