DCS BG27-BQL, Use And Care Manual

Page: 10 / 32

9
Built–In Grill Clearances
"
ROTISSERIE
FIG.03
GENERAL:
The Grill is designed for easy placement into masonry enclosures. For non-combustible applications
the grill drops into the opening shown in (Fig. 04, page 10). A deck or ledge is required to support it
from the bottom. When using the insulated jacket in a combustible enclosure application, (Fig. 04, page
10) bottom. The jacket assembly must be supported from the bottom by a ledge on each side or a
solid deck beneath the entire grill or insulated jacket.
Review the detail drawings shown and take into account the provisions shown for gas line hook-up
clearance in the left rear corner. It is recommended that ventilation holes are provided in the
enclosure in the event of a gas leak. The supporting ledges or deck must be level and flat.The counter
should also be level.