DCP DCP-WR300N, User Manual

Page: 85 / 86

Q
＆
A
DCP-WR300N 82
Q&A
Question Answer
Why are all the
indicators off?
Check the connection between the power adapter
and the power socket.
Check whether the power switch is turned on.
Why is the LAN
indicator not on?
Check the following:
The connection between the device and the PC,
the hub, or the switch.
The running status of the computer, hub, or switch.
Why is the DSL
indicator not on?
Check the connection between the DSL interface of the
device and the socket.
Why does the
Internet access fail
when the
DSL
indicator is on?
Ensure that the following information is entered
correctly:
VPI and VCI
User name and password
Why does the web
configuration page
of the device fail to
be accessed?
Choose
Start
>
Run
from the desktop. Enter
Ping
192.168.1.1 (the default IP address of the device) in the
DOS window.
If the web configuration page still cannot be accessed,
check the following configuration:
The type of the network cable
The connection between the device and the
computer
The TCP/IP properties of the network card of the
computer
How to restore the
default configuration
after incorrect
configuration?
Keep the device powered on and press the Reset
button for 3 seconds. Then, the device automatically
reboots and is restored to the factory default
configuration.
The default configurations of the device are as follows:
IP address: 192.168.1.1
Subnet mask: 255.255.255.0.