DCP DCP-WR300N, User Manual

Page: 5 / 86

Introduction
DCP-WR300N 2
Do not connect this device to any PCs or electronic products, unless our
customer engineer or your broadband provider instructs you to do this,
because any wrong connection may cause power or fire risk.
Do not place this device on an unstable surface or support.
1.2 LEDs and Interfaces
Front Panel
The following table describes the LEDs of the device.
LED Status Description
Power
On The modem router is powered on.
Off The modem router is powered off.
DSL
On ADSL line is synchronized and ready to use.
Blinking ADSL negotiation is in progress.
Off ADSL synchronization fails.
Internet
On Successful PPP session.
Blinking Data is being transmitted via the internet.
Off
Connection fails or the modem router operates in Bridge
mode.
WLAN
On Wireless is enabled but no data is being transmitted.
Blinking Data is being transmitted over the wireless network
Off Wireless function is disabled.
WPS On A wireless device is successfully connected to the network