Instruction Manual HSM2900 PROFESSIONAL BARBER
dcg16.it
14
6.
Charging Notices
⚫
Notes: If the product not being used for a long time, please ensure the
batter charged at least one time within 3 months to avoid damage.
Plug-and-play function means that you can use the product while
charging in case of insufficient power.
⚫
Put the adaptor connector terminal into the port of the product and
then plug into a socket. Switch on the product and then use it.
⚫
After using, switch off and then disconnect the adaptor connector
with product.
⚫
If the battery has been used out, it may be difficult to
start the product even if it is plugged. You should restart
it after charging at least one or two minutes. while
charging, the product body and the adaptor may be a
little hot, however, it is a normal phenomenon.
⚫
Take the adaptor out from the power socket
⚫
Take the plug out from the product
Please hold the plug and take it out.
Don’t pull the cord in order to avoid any damage for adaptor.
⚫
Don’t charge the product more than 6 hours each time.
7.
The Cutting Head Disassembling & Assembling
Cutting head disassembling
Use another hand to hold the cutting head to prevent it flying out.
Cutting head assembling
1.
Insert A into B.
As soon as the charging is finished,
take the plug out from the socket.
6.
Charging Notices
⚫
Notes: If the product not being used for a long time, please ensure the
batter charged at least one time within 3 months to avoid damage.
Plug-and-play function means that you can use the product while
charging in case of insufficient power.
⚫
Put the adaptor connector terminal into the port of the product and
then plug into a socket. Switch on the product and then use it.
⚫
After using, switch off and then disconnect the adaptor connector
with product.
⚫
If the battery has been used out, it may be difficult to
start the product even if it is plugged. You should restart
it after charging at least one or two minutes. while
charging, the product body and the adaptor may be a
little hot, however, it is a normal phenomenon.
⚫
Take the adaptor out from the power socket
⚫
Take the plug out from the product
Please hold the plug and take it out.
Don’t pull the cord in order to avoid any damage for adaptor.
⚫
Don’t charge the product more than 6 hours each time.
7.
The Cutting Head Disassembling & Assembling
Cutting head disassembling
Use another hand to hold the cutting head to prevent it flying out.
Cutting head assembling
1.
Insert A into B.
As soon as the charging is finished,
take the plug out from the socket.
