PMC
16
Owner’s Manual
43
Adjusting Effect Sends
The Effects page allows you to adjust each channel’s effect send level.
To adjust a channel’s effect send level:
1.
Press the
<EFFECTS>
button. You should now be in the Effects Edit page,
indicated by the EFFECTS button LED lighting.
2.
Select the channel(s) and/or group(s) which you would like to edit, using the
<CHANNEL SELECT>
button(s) (the LED on the top of the selected Channel
Select button(s) will light green, indicating your selection).
3.
Turn the
<DATA>
encoder to adjust the effect send levels of all selected
channels.
4.
Repeat steps 2-3 to adjust the effect send level(s) of any other channel(s).
ActivAtiNg groups:
To enable the Group function to adjust the effect send levels
of all channels within a group respectively, press the
<GROUP>
button then perform the
above steps.