PMC
16
Owner’s Manual
39
Using Multi-Select
The PMC16’s operation was designed to provide an efficient workflow. There is a feature
which was designed to allow the user to perform tasks on multiple channels as quickly
as possible. This feature is referred to as “Multi-Select”. Multi-Select is used during Live
Mode operation and allows for quick selection of multiple channels and/or groups for
multi-channel muting, soloing, or editing of channel levels, pans, or effect send levels.
To use Multi-Select:
1.
Press and hold the
<CHANNEL SELECT>
button for the first channel or group
you would like to select.
2.
With the first selected channel’s
<CHANNEL SELECT>
button still held down,
press and release the
<CHANNEL SELECT>
button for each additional channel
or group you would like to add to the multi-selection then release the
<CHANNEL SELECT>
button which you have been holding.
3.
Press the button for the desired function to edit (i.e.
<LEvELS>
,
<MUTE>
,
<PAN>
, etc.).
4.
Turn the
<DATA>
encoder to adjust the parameters for the selected channels/
groups respectively.
5.
Press any
<CHANNEL SELECT>
button to dissolve the multi-selection.
Note:
Relative values are retained unless a channel’s level, pan, or effect send level is
pushed beyond the maximum allowed value or below the minimum allowed value.