PMC
16
Owner’s Manual
42
Adjusting Channel Pans
The Pan page allows you to adjust each channel’s pan setting.
To adjust a channel’s pan:
1.
Press the
<PAN>
button. You should now be in the Pan Edit page, indicated by
the PAN button LED lighting.
2.
Select the channel(s) and/or group(s) which you would like to edit, using the
<CHANNEL SELECT>
button(s) (the LED on the top of the selected Channel
Select button(s) will light green, indicating your selection).
3.
Turn the
<DATA>
encoder to adjust the selected channels’ pan settings.
4.
Repeat steps 2-3 to adjust the pan(s) of any other channel(s).
ActivAtiNg groups:
To enable the Group function to adjust the pans of all channels
within a group respectively, press the
<GROUP>
button then perform the above steps.
Note:
When Group is enabled, adjustment of stereo linked pan settings within a group
is not supported.