11
;
Prior to installation and use of this equipment, record the product identification information from the ID label in the
Inspection and Maintenance Log (Table 2) at the back of this manual.
;
Always ensure you are using the latest revision of your 3M instruction manual. Visit the 3M website or contact 3M
Technical Services for updated instruction manuals.
PRODUCT DESCRIPTION:
Figure 1 illustrates the 3M™ DBI-SALA
®
Flexiguard™ Modular Jib System M200 Adjustable Jib Boom. The M200 Jib System
is used to to provide an adjustable Fall Arrest anchor point for one or two workers. These instructions cover use of the
M200 Jib Boom, but use of the M200 Jib System requires use of a Jib Base (sold separately) in addition to the Jib Boom. For a
list of compatible Jib Base models, see Figure 1.
Figure 2 illustrates components of the M200 Jib Boom. See Table 1 for Component Specifications.
The Fixed Upright Assembly (A) serves as the main body of the Jib Boom. The Gusset (C) braces the Rail Assembly (D), which
lets the user move within the established work area. The Connection Eye (E) secures an SRD as a connection point for the user.
The Lifting Ring (F) is used to secure a chain or web strap for transporting the system. For B2 Jib Boom models, the Adjustment
Channel (M) enables height adjustment of the Jib Boom. For B1 Jib Boom models, the Adjustable Upright Assembly (B) enables
height adjustment in coordination with the Adjustment Winch (G). The cable of the Adjustment Winch is connected to the Jib
Boom through a series of pulleys, including the Lower Pulley of the Locking Assembly (I) and Upper Pulley (J). The Rotation
Handle (H) allows for rotation of the Jib Boom after placement. The Rotation Pin (K) may be engaged to prevent rotation of the
Jib Boom. The Rotation Stops (N) may be used to limit Jib Boom rotation when the Rotation Pin is not engaged. For B1 Jib Boom
models, the Transportation Pin (L) is used to secure the Jib Boom during transportation.
Table 1 –
Specifications
System Specifications:
Capacity
:
Each user must have a combined weight (clothing, tools, etc.) of no more than 310 lb. (140 kg).
Anchorage:
See the User Instructions for your Jib base for more information on loading requirements of structure.
Dimensions:
See Figure 1 for the dimensions of each M200 Jib Boom model.
Product Weight:
See Figure 1 for the weight of each M200 Jib Boom model.
Maximum
Arresting Force:
All connecting subsystems (SRDs, Energy Absorbing Lanyards, etc.) used with the Jib Boom must limit
the Maximum Arresting Force to 1,350 lbf (6 kN).
Maximum
Deflection:
The Maximum Deflection of the system during a fall arrest is measured to be 20.0 in. (508 mm). This
value should be added to any calculated Fall Clearance requirements for your connecting subsystem.
Certification:
The Jib Boom models covered by this instruction meet the test requirements of the standards listed on
the front cover of these instructions. The certification of your Jib Boom depends on the Series it is part
of. See Figure 1 for more information.
Jib Boom
Series
Max Users Applicable Standards
Jib Boom
Series
Max Users Applicable Standards
1
1 user
EN795.2012, Type E
OSHA 1910.140
OSHA 1926.502
2
1 user
EN795.2012, Type E
OSHA 1910.140
OSHA 1926.502
2 users
EN795.2012, Type E
CEN/TS 16415.2013, Type E
OSHA 1910.140
OSHA 1926.502
2 users
EN795.2012, Type E
CEN/TS 16415.2013, Type E
OSHA 1910.140
OSHA 1926.502
M200 Adjustable Jib Booms when used with 3M Jib Bases:
Portable Bases
EN795.2012
CEN/TS
16415.2013
OSHA 1926.502
OSHA 1910.140
8530886
Certified (Type E)
Certified (Type E)
Certified
8530887
Certified (Type E)
Certified (Type E)
Certified
Permanent Bases
8530888
Meets (Type A)
Meets (Type A)
Certified
8530889
Meets (Type A)
Meets (Type A)
Certified
8530920
Meets (Type A)
Meets (Type A)
Certified
8530921
Meets (Type A)
Meets (Type A)
Certified
Jib Boom
Compatibility:
The M200 Jib Boom models covered in these instructions are compatible only with those Jib Base models
listed on the front cover of these instructions.
Summary of Contents for 3M Flexiguard M200
