34
SIGMA S218
Cod. 420120258 REV. 1.0
PROCESSOR
INPUTS & OUTPUTS
USER INTERFACE
Absorption at 1/8th of power in
medium use conditions (*):
2.45 A / 290 W (220-240V~) - 4 A / 290 W (100-120V~)
Absorption at 1/3rd of power in
maximum use conditions (**):
5.25 A / 680 W (220-240V~) - 8.57 A / 660 W (100-120V~)
Full-power rated
absorption (**):
6 A (220-240V~) - 12 A (100-120V~)
Absorption with speaker on in
no-signal condition (idle):
41 W
Inrush current:
88.67 A
Total current and power allowed in a
daisy-chained system (***):
10 A / 2300 W (220-240V~) - 3 A / 330 W (100-120V~)
POWER SUPPLY SPECIFICATIONS (ABSORPTION / INSTALLATION)
*
NOTE FOR INSTALLER
: Values refer to 1/8th of power, under average operating conditions (music programme with occasional or no
clipping). For any type of configuration we recommend to consider them as minimum sizing values.
**
NOTE FOR INSTALLER
: Values refer to 1/3rd of power, under heavy operating conditions (music programme with frequent clipping and
limiter activation). In case of professional installations and tours we recommend sizing according to these values.
Internal controller:
28-bit/56-bit DSP
Limiter:
Peak, RMS, Thermal
Controls:
Subwoofer level, Subwoofer setup (Delay, Polarity), Xover, Outputs Mode
Inputs:
2 x XLR Balanced Inputs
Outputs:
2 x XLR Balanced Outputs
**
Laboratory value obtained using a continuous sine-wave signal
