10PLB76
Woofer
LF Drivers
LF Nd Drivers
Coaxials
HF Drivers
Horns
800 W continuous program power capacity
76 mm (3 in) aluminium voice coil
50 – 2500 Hz response
98 dB sensitivity
Aluminium demodulating ring allows a very low distortion figure
Specification
Nominal Diameter
250 (10) mm (in)
Nominal Impedance (1)
8 Ohm
Minimum Impedence
6 Ohm
Nominal Power Handling (2)
400 W
Continuous Power Handling (3)
800 W
Sensitivity (1W/1m) (4)
98 dB
Frequency Range
50 - 2500 Hz
Voice Coil Diameter
76 (3) mm (in)
Winding Material
Aluminium
Former Material
Glass Fibre
Winding Depth
20 (0.8) mm (in)
Magnetic Gap Depth
8.5 (0.33) mm (in)
Flux Density
1.1 T
Thiele & Small Parameters
Fs
52 Hz
Re
4.8 Ohm
Qes
0.20
Qms
3.4
Qts
0.19
Vas
31 (1.1) dm3 (ft3)
Sd
320 (49.1) cm2 (in2)
Eta Zero
2.2 %
Xmax
+/- 6 mm
Xvar
+/- 7 mm
Mms
43 g
Bl
18.4 Txm
Le
0.32 mH
Mounting and Shipping Info
Overall Diameter
262 mm (10.3 in)
Bolt Circle Diameter
245 mm (9.6 in)
Baffle Cutout Diameter
230 mm (8.8 in)
Depth
124 mm (4.9 in)
Flange and Gasket Thickness
14 mm (0.55 in)
Net Weight
7.3 kg (16.1 lb)
Shipping Weight
7.9 kg (17.4 lb)
Shipping Box
330x330x160 mm
(13x13x6.3 in)
1
For different impedances, please ask.
2
2 hours test made with continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
3
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
