Raider Mini 90 (single/double-seat): Service Manual Version
：
2.0 Feb. 2006
55
5.8 Steering Gear Box and Ball Head
a)
Remove the four bolts of the LH&RH clamp nuts on the steering gear box.
b)
Remove and check the ball head dust cover on the steering gear box for wear.
c)
Check the steering cover on both sides of the steering gear box and grease the ball
head.
d)
Fill the steering gear box with Grease after cleaning the dust; It is recommended
to replace the ball joint if it is loose or not smooth.
5.9 Throttle & Brake Pedal
a)
Remove the throttle, throttle pedal and axle nut.
b)
Check the throttle and brake pedal for signs of wear;
Replace if any wear is present.
c)
Before installation, apply enough grease on the throttle and brake pedal in order to
make them swing more flexibly.
Steering Shaft
Steering Comp.
Steering Ball Joint, Right
Steering Ball Joint, Left
Steering Gear
Dust Cover
Pedal Link Bolt
Pedal Link Bolt
Throttle Pedal
Brake Pedal
Spring
Summary of Contents for Raider mini 90S
Page 1: ......
Page 34: ...Raider Mini 90 single double seat Service Manual Version 2 0 Feb 2006 34 3 6 Starting Failure...
Page 35: ...Raider Mini 90 single double seat Service Manual Version 2 0 Feb 2006 35...
Page 60: ...Raider Mini 90 single double seat Service Manual Version 2 0 Feb 2006 60 Wiring diagram...
