Raider Mini 90 (single/double-seat): Service Manual Version
:
2.0 Feb. 2006
38
c)
Measure the secondary coil resistance with the
spark plug cap in place.
Standard: 7-9 K
Ω
4.3 Ignition Timing
The ignition advance is
15º± 1º B.T.D.C /1700rpm.
The Capacitive Discharge Ignition (CDI) system is factory pre-set and does not
require adjustment.
4.4 Starter Motor
z
Remove
a) Remove the left crankcase cover;
Remove the snap ring from the follower gear of the electric starter;
b) Pull off the wire connector of the electric starter;
Remove the 3 bolts; remove the electric starter;
Remove the O-ring.
z
Disassembly
a)
Remove all the bolts;
b) Disassemble the electric starter.
NOTE: Assemble the starter back with the same amount of washers.
4.5
Battery
z
Initial Service
z
The following procedure is very dangerous and should be performed with
utmost care and attention. Wear protective eyewear, rubber gloves, and have
water available should electrolyte come in contact with skin or eyes.
Summary of Contents for Raider mini 90S
Page 1: ......
Page 34: ...Raider Mini 90 single double seat Service Manual Version 2 0 Feb 2006 34 3 6 Starting Failure...
Page 35: ...Raider Mini 90 single double seat Service Manual Version 2 0 Feb 2006 35...
Page 60: ...Raider Mini 90 single double seat Service Manual Version 2 0 Feb 2006 60 Wiring diagram...