Raider Mini 90 (single/double-seat): Service Manual Version
:
2.0 Feb. 2006
43
z
Battery Replacement:
a) Remove old battery;
Mark which cable is connected to the positive terminal (+) and which cable is
connected to the negative (-) terminal;
b) Clean cable connectors with wire brush or sandpaper to remove oxidation;
c) After charging, install new battery;
Put dielectric grease on the battery terminals to avoid corrosion;
d) Connect cables to the proper terminals: positive cable to positive terminal, and
negative cable to negative terminal;
NOTE:
Positive (+) cable is red and larger in diameter; Negative y cable is black and
smaller of the two in diameter.
CONNECT NEGATIVE CABLE LAST.
e) Torque terminal bolts to 40 in. / lbs;
f) Place rubber pad in bottom of battery tray;
. Securely fasten battery to the vehicle using cover and strap.
z
To avoid possibility of explosion, always connect battery cable in the
order specified:
RED first; BLACK last. An exploding battery can cause serious
injury or death.
z
Batteries contain sulfuric acid.
z
Always shield eyes with protective eyewear when working around
battery acid.
z
Battery acid is poisonous and can cause severe burns.
z
DO NOT smoke around batteries and keep away from open flame.
z
Charge in a well ventilated area.
z
DO NOT smoke around batteries and keep away from open flame.
Summary of Contents for Raider mini 90S
Page 1: ......
Page 34: ...Raider Mini 90 single double seat Service Manual Version 2 0 Feb 2006 34 3 6 Starting Failure...
Page 35: ...Raider Mini 90 single double seat Service Manual Version 2 0 Feb 2006 35...
Page 60: ...Raider Mini 90 single double seat Service Manual Version 2 0 Feb 2006 60 Wiring diagram...