Dazon Raider mini 90S, Service Manual

Page: 16 / 60

Raider Mini 90 (single/double-seat): Service Manual Version
：
2.0 Feb. 2006
16
d) Remove the cotter pin, castle nut, left rear tire,
right rear tire and rear wheel hub in order;
e)
Loosen the 4 bolts on the left/right holder of
the rear wheel axle;
Remove the left/right holder of the rear wheel
axle;
Remove the rear wheel axle together with the
brake caliper assy.;
f)
Remove the lower right connecting bush, bearing
seat of the right rear wheel axle and bearing;
Remove the brake caliper bracket ;
Replace the brake shoe;
g) Assemble in the reversed order of removal.
2.2.13 Idle Speed Adjustment
If the rotate speed of the engine is not stable (either
too low or too high) after the engine has started,
adjust the idle speed adjust screw on the carburetor.
If the engine rotate speed is too high, turn the adjust
screw counterclockwise;
If the engine rotate speed is too low, turn the adjust
screw clockwise;
NOTE:
Idle Speed: 1500
±100r/M
Rear Wheel Hub Cotter Pin
Castle Nut
Bolt
Rear Wheel Axle Holder
Bearing Seat of
Rear Wheel Axle
Connecting Bush
Idle Speed Adjust Screw