background image

 

 

 

40 

iLC2ST User Manual 

 

DaySequerra – One Year Limited Warranty 

 

DaySequerra warrants this product to be free from defects in materials and workmanship to its original owner for 
one (1) year from the date of purchase.  DaySequerra will repair or replace such product or part thereof that upon 
inspection by DaySequerra, is found to be defective in materials or workmanship subject to conditions contained 
herein.

 

 

 

DaySequerra products are sold worldwide, through a network of authorized DaySequerra dealers and distributors. 
This Warranty is for the sole benefit of the original purchaser of a DaySequerra product, purchased directly from 
an authorized DaySequerra dealer or distributor, is restricted to such original purchaser, and shall not be 
transferred to a subsequent purchaser of the product. Proof of purchase in the form of a bill of sale or receipted 
invoice substantiating that the product was purchased directly from an authorized DaySequerra dealer or 
distributor and is within the warranty period must be presented to obtain warranty service. Removal or alteration 
of the original DaySequerra serial number from a product automatically renders that product warranty null and 
void.

 

 

A  Return  Authorization  Number  must  be  obtained  from  DaySequerra  in  advance  of  return.  Parts  or  product  for 
which replacement is made shall become the property of DaySequerra. The customer shall be responsible for all 
costs of transportation and insurance to and from the DaySequerra factory, and all such costs will be prepaid.

 

 

 

DaySequerra shall use reasonable efforts to repair or replace any product covered by this limited warranty within 
thirty days of receipt. In the event repair or replacement shall require more than thirty days, DaySequerra shall 
notify  the  customer  accordingly.  DaySequerra  reserves  the  right  to  replace  any  product  that  has  been 
discontinued from its product line with a new product of comparable value and function.

 

 

 

This  warranty  shall  be  void  in  the  event  a  covered  product  has  been  damaged,  or  failure  is  caused  by  or 
attributable  to  acts  of  God,  abuse,  accident,  misuse,  improper  or  abnormal  usage,  failure  to  follow  instructions, 
improper  installation  or  maintenance,  alteration,  or  lightning,  power  fluctuations  and  other  incidental  or 
environmental conditions.   Further, product malfunction or deterioration due to normal wear is not covered by this 
warranty.

 

 

 

DAY  SEQUERRA  DISCLAIMS  ANY  WARRANTIES,  EXPRESSED  OR  IMPLIED,  WHETHER  OF 
MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR  USE,  EXCEPT  AS  EXPRESSLY  SET  FORTH 
HEREIN. THE SOLE OBLIGATION OF DAY SEQUERRA UNDER THIS LIMITED WARRANTY SHALL BE TO 
REPAIR  OR  REPLACE  THE  COVERED  PRODUCT,  IN  ACCORDANCE  WITH  THE  TERMS  SET  FORTH 
HEREIN. DAY SEQUERRA EXPRESSLY DISCLAIMS ANY LOST PROFITS, GENERAL, SPECIAL, INDIRECT 
OR  CONSEQUENTIAL  DAMAGES  WHICH  MAY  RESULT  FROM  BREACH  OF  ANY  WARRANTY,  OR 
ARISING OUT OF THE USE OR INABILITY TO USE ANY DAY SEQUERRA PRODUCT.

 

 

 

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how 
long an implied warranty lasts, so the above limitations and exclusions may not apply to you.  This warranty gives 
you specific legal rights, and you may also have other rights that vary from state to state.  DaySequerra reserves 
the right to modify or discontinue, without prior notice to you, any model or style product.  If warranty problems 
arise, or if you need assistance in using your product contact:

 

 

 

DaySequerra

 

154 Cooper Road, Building 902

 

West Berlin, NJ 08091     

 

For  more  information,  please  call  856-719-9900,  visit 

www.daysequerra.com

  or  email  us  at 

[email protected]

.

 

 

 

Day Sequerra   154 Cooper Rd. #902   W. Berlin, NJ 08091   Voice 856-719-9900   [email protected]   www.daysequerra.com 

                      |                            

                        

 |                                |                              |                             

|                             

Summary of Contents for iLC 2ST










































Reviews: