11
12
10
Assembly Steps
Ø4x12 round head screw
Windshield
assembly
Ø4x12
flat head
screw
Motor hood
●
Fit the tabs on the windshield onto the
slots located at the front of the vehicle.
Insert five
Ø4x12 round head screw
s and
tighten with a screwdriver.
Vehicle connector
Vehicle connector
Power connector
Motor connector
●
Plug the power connector into the
anode terminal(red) on battery as shown.
●
Plug the motor connector into the
vehicle connector.
●
Repeat for the other side.
●
Fit the motor hood to the vehicle body.
●
Tighten four
Ø
4x12 screws to secure it.
●
Repeat for the other side.