8
9
Assembly Steps
BATTERY INFORMATION
Ø5 nut
M5x40 machine
screw
Steering wheel
Ø4x12 round head screw
View mirror
Windshield
Batteries may leak fluids that can cause chemical burn injury or ruin your product. To avoid battery leakage:
●
Do not mix old and new batteries.
●
Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
Insert batteries as indicated inside the battery compartment.
●
Remove batteries during long periods of non-use. Always remove exhausted batteries from the product.
Battery leakage and corrosion can damage this product. Dispose of batteries safely.
●
Do not dispose of batteries in a fire. The batteries may explode or leak.
●
Never short circuit the battery terminals.
●
Non-rechargeable batteries are not to be recharged.
●
Use only batteries of the same or equivalent type as recommended.
●
If removable rechargeable batteries are used, the are only to be charged under adult supervision.
●
Remove rechargeable batteries from the product before charging.
●
Batter chargers used with toys must be examined regularly for damage to the cord, plug, enclosure and
other parts. In the event that such damage is found, the toy must not be used with the battery charger until
the damage has been repaired.
●
When sound becomes faint or stops, it’s time to replace the batteries.
●
Remove the M5x40 machine screw with
a screwdriver
●
Insert the steering wheel onto end of
the steering shaft, line up the holes in the
steering wheel and the holes in steering
shaft, insert the M5x40 machine screw
and
Ø
5 nut back in the same location and
tighten it with a screwdriver.
●
Fit the view mirror to the windshield,
insert three
Ø4x12 round head screws and
tighten with a screwdriver.
●
Repeat for the other view mirror.