6
Take the two pieces from Piece C and screw each
one on the screws tightly to lock the tablet holder
in place.
Take the Piece D, and align the four holes to match
the four pegs from Piece B. Once they are in, push
either up or down (depending on where you
mounted it) until it clicks into place. Adjust the
tablet width to the size you need and flip down
the lever on the back to lock that into place.
Slide in the tablet and you are
ready to go!
On the right side of the handle bar you will find a tablet
charging port with a rubber covered. Use this to charge
your tablet.
*Please Note* The Boomerbeast must be in the ON po-
sition and the charger port must be set to 1. To disable
power to the charging port set this to 0
