![background image](http://html.mh-extra.com/html/crussis/cross-series/cross-series_installation-instructions_2691525001.webp)
Seřízený představec řádně dotáhněte.
Dotahovací moment 4 Nm
Installation instructions for kick scooters - series CROSS
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
Step 6.
Step 7.
Step 8.
Step 9.
Step 10.
Step 11.
Step 12.
Make sure that cartoon is not damaged
Remove the kick scooter out of the box
Remove the tape holding front and
rear wheel
Remove the protecting material from frame
Remove the protecting material
from handlebars
Put wheels aside
Loosen the screws on the stem
and align so that it faces forward while riding
In this step set the direction
of the stem roughly.
You will align it precisely later with the wheel on
Tighten the screws on the stem with force 4 NM
Remove the screws from the front part
of the stem
Attach the handlebars
Put back the front part of the stem
and lightly tighten, adjust the angle
of the handlebar and screw it with 4 NM
www.kickscooters-crussis.eu