9
Boomer Beast Operation (cont’d)
Driving your unit
Once you have your Boomerbeast set up and connected. It’s time to ride!
Right Handlebar
1) Throttle -
Turn this toward you to engage the motor
and to propell the unit forward. Do this very slowly at
first until you get the feel of how quickly it goes.
2) Lights -
Set this into one of 3 positions
Rightmost position
- All lights are off
Middle position
- Rear running lights are on
Leftmost position
- All lights are on
3) Reverse Switch -
Hold this button down while turn-
ing the throttle to go in reverse
Left Handlebar
1) Motor Power -
Choose from Rear Wheel Drive or All
Wheeled Drive. Set it to 1 For just rear wheels, and set it
to 2 for all wheels. (Ultimate only)
2) Turn Signals -
Slide this switch to the right when
signaling to turn right. And left when signaling to turn
left. Press the white button in the middle once the turn
is complete.
3) Horn -
Press this button to activate the horn.
