DAYLIFF SUNVERTER 3, Installation & Operating Manual

Page: 26 / 40

Operation
Description
Display
E n t e r t h e p a r a m e t e r
modification interface: Display
menu type, parameter number,
parameter value, parameter
meaning of the inverter.
22
4.6 View or Modify Control Parameter
Initial Status: non-control
parameter display
PROG
ENTER
or or
or or
ENTER
PROG
Select the parameter to be
viewed and modified: Parameter
number can be viewed or
modified when the cursor is at the
end of the parameter number.
Confirm the parameter to view or
modify: The cursor will move to
the end of parameter value line.
Modify the parameter value:
When the cursor is at the end of
parameter value line, the
p a r a m e t e r v a l u e c a n b e
modified.
C o n f i r m a n d s a v e t h e
modification: Cursor moves to
the end of parameter number
line.
Quit from the parameter display
mode. Display current running
data
NOTE
When the inverter is operating, the control parameter can
only be viewed. To modify, the inverter must rst be stopped.