DAYLIFF SUNVERTER 3, Installation & Operating Manual

Page: 23 / 40

4 19
Indicator Lights &
Keys
RUN
Name Function
STOP
FAULT
NORMAL
ABNORM
Running Indicator Light
Shutdown Indicator Light
Fault Indicator Light
Normal Indicator Light
Abnormal Indicator Light
Run Key
Stop Key
Data Inquiry Key
Green
Red
Red
Green
Red
On: Inverter is running
On: Inverter is shut down
On: System fault
On: System normal
On: Water tank or well water level is
abnormal
Enter or quit from the display status of the historical
data
Starts the inverter
Shutdown the inverter
Mode Switch Key
1. Switch the contents to be displayed during data
viewing
2. Switch the digit to be edited during data editing
RUN
STOP
DATA
MODE
Increasing Key
1. Increase parameter number or its value in control
parameter display status
2. Change historical date upwards or display
historical data in historical data display status
3. Increase output frequency or display current
running data upwards in running data display
status according to operation mode
Decreasing Key
1. Decrease parameter number or its value in control
parameter display status
2. Change historical date downward or display
historical data in historical data display status
3. Decrease output frequency or display current
running data downward in running data display
status according to operation mode
Programming Key
Enter or quit from the display status of the control
parameter
PROG
Enter Key
1. Confirm the content to be viewed or edited
2. Confirm and save the parameter value when the
parameter is edited
ENTER
+
Reset Key Combination
Press the combination key to reset in protection
status