5
2. Install the bracket and fix firmly on the wall
1. Mark the location according to the bolt holes of the pump bracket and
punch holes in the wall.
WARNING
The pump and the controller must be installed either
horizontally or vertically. Angled installations are not
allowed.
3. Fix the pump into the pump bracket
Installation Arrangement
4. Fasten the copper connectors to the outlet and inlet by use of a wrench
Copper
Connector
Copper
Connector
Pump Body
Filter
Installing
Bracket
Power
Connector
30mm
242.5mm
183.5mm
Dimension with lter
Dimension without lter
Summary of Contents for AQUASTRONG CIRC 16
Page 1: ...AQUASTRONG CIRC 16 Smart Inline Boosting Pumps Installation Operating Manual...
Page 2: ......
Page 15: ......
Page 16: ...INSXXXA 00 21...
