8
Forced Start Switch
LED Indicator On
5. OPERATION
Ÿ
The LED indicator light is always on when the pump is on automatic mode.
Ÿ
The LED indicator light flashes continuously when the pump is on forced start
mode .
Ÿ
CIRC 16 will start and stop automatically due to inbuilt flow sensor.
Ÿ
If the pump does not work due to water flow being lower than 1.0L/min, pressing
the force start button can activate it.
Ÿ
CIRC 16 will stop automatically after it runs for 20 minutes under the forced mode
and switch to automatic mode.
Circ16 does not have inbuilt dry running protection during
operation. Ensure that there is no air in the pipeline to protect
the pump from dry running.
NOTE
Summary of Contents for AQUASTRONG CIRC 16
Page 1: ...AQUASTRONG CIRC 16 Smart Inline Boosting Pumps Installation Operating Manual...
Page 2: ......
Page 15: ......
Page 16: ...INSXXXA 00 21...
