DAYCO D105DC, Operator'S Manual

Page: 10 / 27

10 Page
D100 SERIES HOSE CRIMPING
COUPLING STOP RAM RETRACTION STOP
 
  
Slide the Pusher into position on the hydraulic ram
    
Recheck the fitting for correct alignment and depress the
pneumatic Start/Stop switch bulb. Keep it depressed until the crimper
shuts off automatically.
 
 

For the D100S-DC, bring the Pusher down until the white Micro-
Site line just appears on the micrometer and release the pressure
source allowing the Pusher to retract.
 
 

Measure the finished fitting diameter to
be certain that it is within the crimp specification
tolerances.
 
 

Check the diameter of the finished crimp
to be certain that it is within the hose and fitting
manufacturer’s specifications.
    
If multiple fittings are being crimped set the Coupling Stop to
automatically position the fitting and set the Ram Retraction Stop to
limit the ram retraction to the position where the hose and fitting can
just be easily removed.
Magnets embedded in the Pusher will retract the Compression Cone
with the Pusher while still permitting the Compression Cone to align
correctly for the next crimping operation.