DAXOM UKDAX-80Y10BT, Installation Manual

Page: 53 / 55

53
During guarantee time of product we provide Free of Charge Service to users against
defect of related materials and production about device. When you meet with problem
while using, please contact with our after sales service department. Repairing and
maintenance of the device by unauthorizedperson will make the device out of
warranty. Afterwards our company will not responsible from damages and accidents.
Error Code Error Solution
E0

Water pressure is not
enough

Water pressure switch
damage

Set the water pressure between 1 and 2
bars

Call authorized service
E1 
Heating sensor damage

Although you wait for a while if you still
have seen the same code, call the
authorized service
E3

Warning of water
temperature is over 85
o
C

Device will start to operate a few min later
E4

Warning of limit thermostad
is in circuit

When the temperature is below 85
o
C, it is
going to start to operate

Although you wait for a while if you still
have seen the same code, call the
authorized service
E5

Pipe is blocked or valve is
closed

Pump damage

Flowmeter damage

Control if tis closed valve or not at heating
installation and clean silt trap

Call the authorized service
8. REPAIR AND SERVICE
9. TROUBLE SHOOTING