DAXOM UKDAX-80Y10BT, Installation Manual

Page: 34 / 55

34
It is possible to command device with room thermostad. In this way, device operates
according to temperature of environment of room thermostad place. Room
thermostad connection must be done by authorized service while the device is
activated.
Device can be set according to floor heating (low temperature) or radiator heating
system. In this way, overheating is prevented especially for floor heating systems.
While the device is operating at floor heating mode max 55
o
C, it can be set max 80
o
C at radiator heating mode. Devices connected to floor heating systems will be taken
to floor heating mode by authorized services at the time of first activated of device. In
this way, in this case, it will be impossible to change heating mode for users by
consciously or by mistake. For radiator heating modes, if users want, they can provide
operation of device max 55
o
C by changing into heating mode to ground heating
mode. While symbol is seen at radiator mode, it is not seen at floor heating
mode;

Enter the setting menu by pressing 2-3 seconds
6.4.5. Room Thermostad Setting
6.4.6. Setting The Heating Mode