Drill bolts and screw holes by using the mounting template supplied
with the water heater in a place appropriate to the conditions
mentioned above.
Insert the Ø8 diameter bolt to the upper part and insert the screws to
the lower part.
Drill the 100 mm diameter waste gas pipe hole according to pipe
measurement, which is given as follows. (The waste gas pipes are
supplied with the water heater
Place the fresh air/waste gas pipe into the holes previously opened
for the exhaust as their clearance will stay outside. Mount the
relevant edge of the bracket part to the water heater flue and mount
the other edge as to pass over the waste gas pipe.
4.2. The Wall Mounting Of The Heater
4.2.1. Mountaning Of The Waste Gas Pipe
Summary of Contents for UKDAX-11ST
Page 1: ......
