3. With
or
buttons, it is set to “1” for room thermostat bring into
use, it is set to “0” for putting hold on device.
4. Exit setting menu by pressing
button.
Device can be set according to floor heating (low temperature) and radiator
heating system. Thus over heating is preventedespecially for floor heating
systems. While the device is operating at floor heating mode, it is set
maximum 55
o
C. While floor heating system connected heaters is starting-up
by authorized service, it will be set floor heating mode inside the device. In
this case, it will be impossible to change heating mode by user by consciously
or by mistake. For radiator heating modes, if users want, they can persuade
operating of device maximum 55oC by changing into heating mode to ground
heating mode. While the device is set for radiator heating, it is seen
.
While the device is operating regularly,
1. Enter setting menu by pressing
button 2-3 seconds.
2. Press
button 3 times,
is seen, heating mode choosing
indicator blinks.
3. With
or
buttons it is set to 0 for heatingmode bring into use
floor heating, it is set to 1 bring into usefor radiator heating. For floor
heating systems, because of heating mode is set from inside device by
authorized service, in this menu “0” set cannot be changed.
4. Exit setting menu by pressing
button.
6.4.6MAKING SETTING OF HEATING MODE
