radiator temperature set, “WATER TEMPERATURE “expression fizzle
out and setting temperature starts to blinks. Two seconds later after
setting is completed, device operation temperature is seen in LCD and
“WATER TEMPERATURE” also seen in LCD. Reaching setting
temperature of the device can take a time.
Bath water temperature can be made in 3 ways. These are;
1. While tap water is flowing, setting can be made by or buttons.
2. If the device is only set for hot water (summer mode), setting can be
made by or buttons while standby mode or operation mode.
3. After the device is only taken to hot water heating mode (summer
mode),setting can be made. For this after it is pressed 2-3
seconds, after pressed
“Shower” is chosen with or then press to
Thus the device is
taken to summer mode. After that,temperature setting is made with
and buttons (after the process, device must be again taken to first
operation mode).
During the setting time, heating temperature blinks. Two seconds later
after setting is completed, device operation temperature is seen at the display
and “WATER TEM” is seen at the display.
6.4.3 SETTING TAP WATER TEMPERATURE
