Dawson EMV-220 METRIC, Operator'S Instructions/Spare Parts List

Page: 13 / 51

NOTE:
7KHH[FDYDWRUK\GUDXOLFSRZHURXWSXWPXVWEHPDWFKHGWRWKHUHTXLUHPHQWVRI
WKHYLEUDWRUEHIRUHLQVWDOODWLRQ$VWDQGDUGH[FDYDWRUHQTXLU\VKHHWLVDYDLODEOHIRU
the user to complete prior to considering the suitability of the excavator for use
with the EMV220.
The vibrator is mounted in place of the excavator’s bucket, and should be
allowed to hang freely once installed. Remove the bucket prior to installing the
EMV.
$VKHDUSLQLVXVHGWR¿[WKHYLEUDWRUWRWKHERRPYLDDQDGDSWRUEUDFNHW
'LIIHUHQWDGDSWRUEUDFNHWVPD\EHUHTXLUHGIRUGLIIHUHQWH[FDYDWRUV&KHFNWKLV
SULRUWRWKHVWDUWRILQVWDOODWLRQ,IWKHH[FDYDWRULV¿WWHGZLWKDTXLFNKLWFKLWZLOO
HLWKHUEHQHFHVVDU\WRUHPRYHLWRUSXUFKDVHKDOIDTXLFNKLWFKDQGPRGLI\WRVXLW
the Dawson adaptor bracket.
Standard brackets are available for different machine size ranges. Typically, one
RIWKHVHEUDFNHWVFDQEHDGDSWHGWR¿WDYDULHW\RIGLIIHUHQWSLQVL]HVDQGGLSSHU
end widths by using a kit of bushes and spacers.
7KH(09K\GUDXOLF¿WWLQJVDUHPHWULFIRUWKH(097KHSUHVVXUHDQGUHWXUQ
lines (already connected to the vibrator) have metric 16 S. The pressure line is
usually connected to the bucket ram “extend” circuit and the return line to the
bucket ram “retract” circuit. The third, and smaller, drain line is fed either directly
back into the hydraulic tank on the excavator, or connected to the breaker circuit
UHWXUQOLQH7KH¿WWLQJRQWKHGUDLQOLQHFRQQHFWHGWRWKHYLEUDWRULVDPHWULF/
PDOH¿WWLQJ([FDYDWRUVZLOOUDUHO\KDYHWKHVDPH¿WWLQJVDVWKHVHRQWKHLUEXFNHW
FLUFXLWVRDGDSWRU¿WWLQJVPXVWEHXVHG
MOUNTING INSTRUCTIONS
www.dcpuk.com
4.0
4.1
MOUNTING THE VIBRATOR