Dawlance DWT 1470 PL User Manual Download Page 7

Page: 7 / 11

Load laundry

Operation

It is suggested to use low foam washing powder.
For the quantity of the concentrated washing powder, please refer to its manual.
Remarks: Avoid splashing of water and wastage of washing powder. Water level should not be too
high, if the laundry is less.

Withdraw the dispenser box before adding the detergent.
Pour concentrated synthetic washing powder into
the box directly as shown in the left illustration.
For the dosage of washing powder, please refer
below.
It is suggested to use low sud washing powder.

How to use the washing powder

Detergent box

How to use bleach

Fill water to the selected level.

Dilute the bleach in the container

and pour it slowly into the washing

tub.

Do not use bleach for colored or

figured laundries as they are prone

to lose colors.

Do not put bleach in the laundry

directly.

Refer to the manual for the usage

and quantity of the bleach.

Please dissolve powdered bleach

before use.

Use of detergent

Dissolve in the machine directly (not suitable for
preset program)
1. It is suitable for low water level.
2. Add the washing powder and run the machine for
30 seconds to dissolve it completely.
3. Put the laundry in and select suitable water level.
For instant dissolving of the washing powder
1. Prepare warm water about 30

C in a container.

2. Pour the powder while stirring to fully dissolve it.
The washing powder is more prone to pollute the
laundry than the detergent, therefore, please use
it in proper quantity.
Washing powder with poor quality or not used for a
long period may get blocked. Please clean the
detergent box frequently.

The capacity of washing and spinning of the machine refers
to the largest weight of the standard laundry under dry
conditions. Washing quantity shall be lower than the rated
capacity.
Different thickness, size and type of the laundry will
influence the actual washing capacity. It is suitable that

the laundry can be turned around normally during washing.
Do not select high water level when the laundry is less.

At the start of the program, press WATER LEVEL and PRESET at the same time. This will give you an

option to either select WATER RECYCLE, LOW NOISE, or LOW NOISE-WATER RECYCLE.

If LOW NOISE is selected, then the program’s default setting will be NORMAL and the PROGRAM

button will get locked.

If only RINSE and SPIN are selected, then WATER RECYCLE preset can be chosen.

To set CHILD LOCK press WATER LEVEL and PRESET while the machine is working. To unlock, press

the same buttons again.

Control panel instructions

Mode and meaning of the indicator light

On: Indicates the selected mode.
Flashing: Indicates the program is running.

Additional functions

With DIY program, you can set the spin time.
At the start of the program, the spin time setting
is "7 minutes".
At the start of the program, you can press "SPIN"
to set spin process only and press "SPIN" again to
set spin time.

With DIY program, you can set rinse time.
At the start of the program, the rinse time setting is "2 times".

At the start of the program

1. If there is no water in the inner tub, the washing machine is in "FUZZY" condition. At this point, the washing time is

"15 minutes", rinse time is "2 times", spin time is "7 minutes", water level and preset are displayed "--" and the program

is "NORMAL

"(or press “PROGRAM” to select “HEAVY).

If "START/PAUSE" button is pressed, the washing machine

will automatically sense the weight of laundry. It will also set the water level and will adjust the time accordingly.

2. If there is water in the inner tub, the washing machine is not in "FUZZY" condition. At this point, the washing time is

"15 minutes", rinse time is "2 times", spin time is "7 minutes", water level is "7", program is "NORMAL

and

digital time displays the time to finish washing.

Put power supply through and press "POWER" button. Now the washing machine is at the start of the program:

With DIY program, you can choose soak function and wash time.
Press "WASH" button for 2 seconds to choose soak function and press for
2 seconds again to cancel soak function.
Under "NORMAL"and "HEAVY" programs, you can choose soak function. The soak is
before wash.
At the start of the program, the wash time is "15 minutes".

Soak (min.)