DV-332 Analog/Digital User Guide
79
Adjusting sound volume
Adjusting sound volume at GW is enabled to control sound volume toward two directions for
internet/subscriber. Therefore, adjustment for voice volume should establish for each FXS/FXO port
individually.
1)
Setting FXS port volume
GW/CONFIG/FXS>
show
©
========================================================================
FXS Configurations Show
========================================================================
Voice Output Gain (vgain) : dB
-2 -2 -2 -2
PCM Input Gain (igain) : dB
0 0 0 0
Caller id Generation mode (cid) :
DISABLE DISABLE DISABLE DISABLE
ring cadence on time (ron) : 1 sec
ring cadence off time (roff) : 2 sec
Polarity reversal (pola) : DISABLE
Dial Tone Type (dtype) : CONTINUOUS
Initial digit timeout(init) : 10 sec
Inter digit timeout(idt) : 5 sec
Post digit timeout(pdt) : 2 sec
hook flash guard time (guard) : 600 ms
Ring Vrms Value (vrms) :
60 60 60 60
CODEC filter value : KOREA
No answer timer(natimer) : 180
FXS/FXO|LBU One2One Mode(one2one) :
DISABLE DISABLE DISABLE DISABLE
FXO unblock time(ubtime) : 500 ms
DTMF duration (dur) : 120 ms
DTMF interval (intv) : 60 ms
Wait dialtone (wdt) : 2 sec
Ringing timer (ringing) : 200 sec
Early DTMF (edtmf) : DISABLE
Early DTMF Onhook guard (etime) : 1 sec
Force On-Hook (fon) : DISABLE