DV-332 Analog/Digital User Guide
75
==========================================================================
yes/no prompt mode (prompt) : YES
watchdog timer (wdt) : YES
# Processing Mode (dtp) : END_OF_DIGIT
web mode (web) : YES
telnet mode (telnet) : YES
telnet keepalive timer (keep) : 0 (sec)
local call feature mode (va) : YES(pickup number : **)
ethernet wan speed type (wan) : AUTO
ethernet lan speed type (lan) : AUTO
telnet port (tport) : 23
web port (wport) : 8080
digitmap mode (digitmode): NO
UPS mode (upsmode) : NO
primary clock source (clkp) : NORMAL0
long/short haul transceiver (haul) : LONGHAUL
dtu block mode when wan link down (wblmode) : PHYSICAL
dtu block when dtu link down (dblchk) : NO
dtu relay control (drelay) : OFF
pcm_coding_law (pcm) : PCM_ALAW
Company name (com) : DAVOLINK
==========================================================================
GW/CONFIG/COMMON>
In "dtu block mode when wan link down (wblmode)" option, there are 3 values you can choose.
DISABLE : This does not use this feature.
PHYSICAL : It makes Layer 1 down so that PBX will acknowledge that the digital trunk is down. Thus,
it will reroute calls to backup ports by its own policy or give "Release tone" or
announcement("Telephone is out of order").
LOGICAL : With Layer 2 and 3 all alive, it only blocks an E1 channel. When "Setup" messages come
from PBX, it will give "Release Complete" back to PBX. Q931 reason code will be "Cause
i = 0x80A2 - No circuit/channel available".
8.2 FAX configuration
It will configure FAX sending/receiving. There are two ways to set up this feature.