manualshive.com logo in svg

Davolink DV-302, Operation Manual, Page: 16 / 65

Share
Download
Davolink DV-302 Operation Manual Download Page 16

 

DV-302 OPERATION MANUAL 

6 

3.6 VoIP Function 

SIP  is  a  text-based  protocol  that  is  based  on  HTTP  and  MIME,  which  makes  it  suitable  and 

very flexible for integrated voice-data applications. SIP is designed for real-time transmission, 

uses  fewer  resources  and  is  considerably  less  complex  than  H.323.  Its  addressing  scheme 

uses URLs and is human readable. DV-302 support SIP protocol defined in RFC 3261. 

 

3.7 TCP/UDP/IP Protocol Processing Function 

TCP/UDP/IP  Protocol  Processing  Function  processes  various  Protocols  like  TCP  complying 

with RFC793, UDP with RFC768 and IP Protocol with RFC791.   

 

3.8 Ethernet Control Function 

Ethernet  Control Function  is used to process MAC, Ethernet protocol  or IEEE 802.3  Protocol 

and perform ARP for TCP/IP communications with CSMA/CD data network.   

 

3.9 FAX Relay Function 

The  DV-302  FAX  Relay  function  enables  you  to  place  and  receive  fax  calls  over  a  VoIP 

network in addition to voice calls. 

 

3.10  STUN Function 

STUN  is  an  abbreviated  word  of  Simple  Traversal  of  User  Datagram  Protocol  (UDP)  through 

Network  Address  Translators  (NATs).  It  is  a  lightweight  protocol  that  allows  applications  to 

discover the presence and types of NATs and firewalls between them and the public Internet. It 

also  provides  the  ability  for  applications  to  determine  the  public  Internet  Protocol  (IP) 

addresses allocated to them by the NAT. It is defined in RFC 3489. 

The DV-302 enables an enhanced mechanism to overcome NAT/FW network configuration. 

By default, this feature is enabled so the 

customer doesn‟t need to set other NAT transparent 

features like STUN for VOIP calls. 

 

3.11  Telnet Remote Control Function 

Telnet  Remote  Control  Function  is  used  for  an  operator  to  access  the  equipment  using  the 

RFC  854  Telnet  Protocol  in  a  remote  system  for  operation  and  management.  The  operator 

may see and maintain the system via access through a Telnet from a remote location. 

Summary of Contents for DV-302


































































Reviews:

No comments