Step 5: Import the configuration file by importing the csv file: Go to MENU: FILE / Import New / => select the file
with name NH3 Sensor-2021.10.30-Template-V1.2.csv (
in the link below
). Then click Connect;
To maximize the distance of transmission, the ideal condition is Line-of-sight (LOS) between the Sigfox sensor and
Base station. In real life, there may be no LOS condition. However, the Sigfox sensor still communicate with Base
station, but the distance will be reduced significantly.
CONFIGURATION TEMPLATE FILE FOR WSSFC-G4F-NH3
9. Installation
9.1 Locate the good place for Radio signal
ATTENTION:
DO NOT
install the Sigfox sensor or its antenna inside a completed metallic box or housing, because RF signal
can not pass through metallic wall. The housing is made from Non-metallic materials like plastic, glass, wood,
leather, concrete, cement…is acceptable.
